What are the installation methods of full-color P3 indoor LED display?

When it comes to indoor LED display, P3 should be familiar to everyone. The sales volume of p3 led full-color screen is unparalleled among various indoor models. This is because the definition of p3 led screen is good. More than 110000 pixels per square meter can ensure its high resolution. The important reason is that p3 led display has a relatively large price advantage compared with P2.5 for P2 and small spacing LED displays, P3 is undoubtedly very cost-effective. If you want to buy a good p3 led display, the refresh rate is a very important indicator. The high refresh p3 led display is clearer and more delicate, and there is no scanning line and water ripple in shooting.

P3 indoor LED display adopts pure red, pure green and pure blue high brightness solid color LED as the display material, combined with multimedia technology, the picture is vivid and realistic, and can directly play TV, video, VCD, etc; Advertising information and TV programs can be combined arbitrarily; P3 full-color screen adopts the packaging method of SMD surface paste 2121 light beads (full-color black light), which is mainly composed of red, green and blue; One square meter has 111111 pixel points, and the point spacing between each pixel point is 3mm; The scanning mode is 32 scans, and the power consumption of one square meter is about 800 watts per square meter. The novel mask setting makes the color mixing more uniform, and the high-density pixels make the image quality clearer and the viewing angle wider.

P3 full-color indoor LED display adopts key materials such as high refresh IC, SMDLED, special power supply and standard box. The brightness of the screen can reach 800-2000nits. It has the advantages of high density, high definition, high gray scale, high contrast, high quality, safety, stability, reliability and rapid response.

P3 indoor full-color indoor LED display, the point spacing between lamp beads is 3mm, the conventional module adopts faceless design, and 2121 lamp beads. The lamp beads can be divided into iron bracket, copper bracket and gold wire packaging. There are many copper bracket lamp beads commonly used. The iron bracket is prone to moisture and rust, and the price of gold wire packaging is relatively high.

P3 full-color display screen uses different installation methods according to different fields, sizes and installation environments. P3 led display can be installed in the following ways: wall mounted, cantilever, inlaid, column, standing, roof, mobile, stadium fence, rental hoisting, arc and other installation methods. In order to be beautiful and save money, we can choose our own installation method.

Today, I will introduce several common installation methods and installation tutorials of indoor P3 full-color display. For the installation of P3 indoor full-color display screen, several installation methods such as inlay, hoisting and wall hanging are generally adopted. Here is how each installation method is assembled:

1. Inlaid installation method: the inlaid structure is to open a hole in the wall and inlay all the wall in the wall. It adopts front maintenance, and the p3 led unit board is pasted on the frame structure with strong magnetic materials. The size of the opening shall be consistent with the outer frame size of P3 full-color screen and properly decorated. In order to facilitate maintenance, the opening on the wall must be through, otherwise the front disassembly mechanism shall be used.

1) The whole P3 display screen is embedded into the wall, and the display plane is at the same level as the wall

2) Simple box design is adopted

3) Front maintenance (front maintenance design) is generally adopted

4) This installation method is used indoors and outdoors, but it is generally used for LED display screens with small spacing and small display area

5) It is generally used at the entrance of the building, the hall of the building, etc.

2. Hanging installation method: it is applicable to the display screen with a total weight of less than 50kg and a small area of p3 led display screen, which can be directly hung on the load-bearing wall. Indoor load-bearing concrete can adopt standard hanger, and the length of hanger rod depends on the site conditions. The indoor steel beam is hoisted with steel wire rope, and the color of the outer sleeve is consistent with that of the screen body, which is decorated with steel pipes.

1) This installation method is mostly used indoors and semi outdoors

2) It is generally used at the entrance of passages and corridors, as well as at the entrance of stations, railway stations and subway entrances

3) It is used for traffic guidance on highways, railways and expressways

4) The panel design generally adopts integrated cabinet design or hoisting structure design

3. Wall mounted installation method: it is applicable to P3 full-color display screen with a total weight of less than 50kg. It can be directly hung on the load-bearing wall without leaving maintenance space.

1) This installation method is usually used indoors or semi outdoors

2) The display area of p3 led display screen is small, and generally no maintenance channel space is left. The whole screen is removed for maintenance, or made into a folding integrated frame

3) P3 full-color LED display has a slightly larger screen area, and generally adopts front maintenance design (i.e. front maintenance design, which usually adopts column assembly)

4. Leasing hoisting method: the hoisting screen should not be enlarged. The general requirement is below 6m * 10m. Exceptions to special box materials and strip curtain type. The top is equipped with lifting beam and the bottom is equipped with bottom beam. The lifting beam is used to lift the screen. The row and row boxes are connected by hoisting mechanism, and the horizontal boxes are equipped with lock catch to tighten. The hoisting mechanism is divided into gear type, cone rod type and bolt type, with the following different characteristics:

1) The gear type is expensive and beautiful,

2) Cone rod type, moderate price and reliable.

3) Bolt type, reliable, troublesome assembly, suitable for repeated disassembly and assembly.

The above is the installation method of indoor P3 full-color indoor LED display I summarized for you. In the actual engineering installation, there are some other installation methods, which will not be introduced one by one here. These are common installation methods, and the installation difficulty is relatively small. The main thing is to require the installation personnel to strictly implement the installation steps and operation procedures to ensure the qualified and safe installation of the screen. Only in this way can the communication effect of full-color indoor LED display be truly brought into play and meet the requirements of advertisers.

You can visit our HOME page to know more about indoor LED display product.